The Node.IT family of boards is built around the ESP8266 WiFi micro controller. Around it we have built a number of extremely small expansion boards, we call 'em +One modules, and they will allow you to create exciting IoT applications in no time.
The following people were instrumental to our successful Kickstarter campaign and we'd like to mention them here and say thank you for your support.
|Carl H. Blomqvist||Jake Villarreal|
|Hans Månsson||Stefan Nilsson|
|Joel Parker Henderson||Alec Kristi|
- A more comprehensive description of the Node.IT concept.
The controller modules
|ESP320 - ESP32 based WiFi/Bluetooth processor module|
An ESP32 based processor board, with 16Mbyte FLASH, 520KByte SRAM and a USB interface on just 27.5 x 17.8 mm's
|ESP210 - ESP8266 based WiFi processor module|
An ESP8266 processor board, with 4Mbyte FLASH and USB interface on just 27.5 x 17.8 mm's
|ESPD21 - An Atmel SAMD21 Cortex-M0 based module|
An SAMD21 based processor module with 256KByte FLASH, 32KByte RAM, USB interface on 25.5 x 17.8 mm
The stackable +One modules
|BatOne - Li Ion battery charger and DC buck regulator|
Want to run your system on Li Ion batteries ? Then this is the +One module for you
|EnvironOne - Light, Humidity, Temperature and barometric pressure all in one|
This +One module comes with an OPT3001 and a BME280 sensor. Perfect for room monitoring
|Io4One - 4 GPIO lines|
This +One gives you an additional 4 GPIO lines. All are programmable to input or output and can generate an interrupt.
|Adc4One - 4 channels 12/16-bit Analog Inputs|
In need of more analog inputs ? This module adds 4 12 bit analog inputs to your system.
|RtcOne - Battery backed up Real Time Clock|
This is a pretty standard RTC module but it comes with a 64-bit unique ID that you can use to identify your system.
|FET4One - 4 channel MOSFET driver board|
This is a simple 4 channel MOSFET board that can be used to drive simple motors, relays etc.
|SdOne - SD Card reader|
Connects an SD card to your system. This module contains an SD card socket that connects to the SPI interface of the Node.IT stack controller.
|ProtoOne - Simple prototype module|
A +One module that can be used to build you own designs. Stacks like all other +One modules and comes with a 6-pin JST +One expansion connector.
|10DOFOne - A 10 degrees of freedom board|
A state of the art 10 degrees of freedom module designed for the Node.IT stack.
|MotorOne - Addressable 2 channel Motor Driver|
A 2 channel DC motor driver that can drive two DC motors or one stepper motor.
|GprsOne - GPRS modem module|
A GPRS modem module that will allow your system to connect to any GPRS network in the world.
|BlueOne - BLE Bluetooth module|
The Workstation boards
|Workstation40 - 40 pin DIP base board for the ESP210 module|
This base board looks like a 40 pin DIP micro controller and gives you extra digital and analog functions.
- An example on how a few Node.IT boards can be used to monitor the environment of a room.